$25.00 OFF
BEDLINER SPECIAL
For our current savings coupon click here, print and redeem coupon at time of appointment
WE SUPPORT
OUR TROOPS
Discounts for active
military personnel.
(Military ID required)
| |
|
|
Coatings for Every
Industrial & Commercial
Need |
|
|
|
|
|
Arma Coatings offers a
wide range of application-specific products designed to protect a variety
of substrates in all types of industry. Our environmentally-safe coatings,
made of 100% solids, offer high tensile strength, impressive elongation (stretchability),
and superior abrasion & corrosion resistance.
Enhance
performance & extend service life of equipment.
Tough,
seamless protection of concrete, metal, wood and fiberglass.
Technical data sheets available.
|
|
ARMA 952
Arma 952 is a plural-component, 100% solids, polyurethane/polyurea spra
y elas
tomer. This system provides a waterproof, flexible, extremely tough monolithic membrane with
excellent abrasion and chemical resistance. Arm
a 952 bonds
tenaciously to metal, concrete, fiberglass and wood surfaces, and remains flexible at temperature extremes from -40° to
+93°C (-40° to +200°F.) 
Approvals
Meets all EPA Emission Levels for VOC's
USDA - Secondary and Incidental Food Contact
Features
Arma 952 combines the processing advantages of a polyurea with the economical performance of a polyurethane coating.
 |
Arma 952 is a seamless membrane that can be
handled and walked on within 30 seconds of the time it is sprayed.
|
|
Arma 952 is extremely flexible, stretching
to 280% of its original size without any adhesion loss, eliminating the "shearing effect" and loss of adhesion that plagues other coatings
due to substrate expansion, contraction and elevation shifts.
|
|
Due to it's almost instantaneous gel time,
Arma 952 can be built up to any thickness in one application, including vertical and overhead surfaces, which eliminates the need for multi-coat
applications.
|
|
Arma 952 is 100% solids. No solvents, no
V.O.C.'s.
|
|
Arma 952 has high temperature stability
with a working temperature of up to 121°C (250°F) with intermittent temperatures up to 177°C (350°F).
|
Heavy Equipment Truck Bedliners Horse & Animal Trailers Agricultural Equipment Landscaping Vehicles Pest Control Vehicles Flatbeds &
Trailers Marine Flotation
|
|
| ARMA
400
This pour-on product is used in dump-truck beds. The slow-set application provides a hard, glossy surface
necessary for smooth movement of cargo during tilt unloading. Arma 400 stands up to high-temperature loads.
|
|
ARMA 901 & 960
Arma 901 is a state of the art, 100% solids, high performance sprayed plural component polyurea elastomer, and Arma 960 is its
harder counterpart. These systems are based on amine-terminated polyether resins, amine chain extenders and isocyanates. Each provides a flexible,
extremely tough monolithic membrane with excellent water, chemical, and abrasion resistance.
Polyurea Formulation
Polyurea spray elastomer systems are 100% solids, two-
component spray systems which have extremely fast reactivates and cure limits. This technology is similar to the high performance polyurethane systems
currently used, except for several key points.
In the polyurea elastomer technology, JEFFAMINE polyoxyalkylene diamines and triamines have replaced the polyols, amino chain
extenders are utilized, and catalysts have been eliminated.
This improved chemical formulation allows Arma 901/960 to cure on cold surfaces and provides superior performance under
extremely humid conditions.
Features
|
Arma 901/960 are seamless membranes that
can be handled and walked on within 30 seconds of the time they are sprayed.
|
|
Product flexibility is a tremendous
advantage of Arma 901. Arma 901/200 stretches to 200% of its original size without any adhesion loss. Arma 901/480 stretches to an amazing 480% of its
original size.
|
|
Arma 960 boasts exceptional abrasion
resistance providing a seamless, slick, impact-resistant protective surface.
|
|
Unlike most polyurethanes and epoxies, Arma
901/960 are hydrophobic and therefore affected very little by damp or cold surfaces. Each can be sprayed directly on moist surfaces, and have been
sprayed at -40°F/C with minimal effect on tack free time.
|
|
Due to their almost instantaneous gel time,
Arma 901/960 can be built up to any thickness in one application, including vertical and overhead surfaces, which eliminates the need for multi-coat
applications.
|
|
Each coating is 100% solids. No solvents,
no V.O.C.'s.
|
|
Arma 901/960 have high temperature
stability with a working temperature of up to 121°C (250°F), and intermittent temperatures up to 177°C (350°F).
|
|
These products are formulated without the
use of catalysts. This increases shelf life of the liquids in the drums as well as enhancing color and light stability in the finished product.
|
|
Approved: UL94-94 Horizontal Burn Test.
|
Secondary Containment Solid Waste Handling Equipment Manhole Renovation Chemical Tanks Boat Hulls Dump Trucks Hoppers & Chutes Tanks, Pipes Decorative Products & Signage
|
|
|
